...
Step 1. Turn on the handheld and from the Console Menu Select option 3. CheckOut Stock.
Step 2. Select 1. Start CheckOut to commence a Check Out.
- Press 0 to return to Main Menu
Step 3. Select the CheckOut Location (where stock is to be removed from).
- Use Down and Up Arrows on keypad to scroll between location pages (if applicable).
Step 4. Enter in a Customer Card ID that the goods will be checked out to.
- If a Default Customer ID has been setup then press Enter key to select the default Customer.
Step 5. Key in Serial/Batch number or Scan Serial/Batch barcode.
- Enter to Confirm Select Customer - Proceed to step 6.
- 0 to Select a Different Customer - Return to Step 4.
Step 6. Enter in a Reference number for the Check Out.
- Press Enter will use the next Sequential Reference number within the system as per your preference settings.
Step 7. Scan Item Barcode or Enter a Item Code
- ENTER key to exit/cancel - Return to Step 2.
- 0 to Review Order Proceed to Step 11.
- "." key to End/Complete Order Proceed to Step 12.
Step 8. Scan or Enter Batch/Serial Code.
- ”~” is the default batch/serial number - Press Enter key if the item it not using batch/serial numbers.
Step 9. Confirm Item Quantity.
- Press Left Arrow to Edit Check Out Quantity (by default this is set to 1). Proceed to Step 10.
- Press Right Arrow to Confirm Check Out Quantity is Correct. Return to Step 7. Repeat Steps 7 to 9 to Check Out multiple items.
...
Step 10. Enter in New Check Out Quantity for displayed item.
- Once value is entered press Enter Key - Return to Step 9.
Step 11. Enter in New Check Out Quantity for displayed item.
- Press Left and Right Arrow Keys to scroll between item pages.
- Press ENTER key to toggle between Pending and Release status. Release Status will Cancel that line item from Check Out.
- Press ESC Key to Return to Step 7.
- Press ENTER key to Complete and Return to Step 2.
Related
...
Information
“BIN :” Bin Location. * is set as default bin. Used to represent items without a Bin location assigned.
“BRN# :” refers to Batch/Serial Number. ~ is set as the batch/serial default. Used to represent items not batch/serial tracking.
“LOT# :” Pallet Lot Location. 0 is default pallet Lot Location.
“GTIN” Barcode Number.
...
| Page Properties | ||
|---|---|---|
| ||
|