Console - Transfer Stock

DESCRIPTION

The Transfer Console will create an open Transfer Order within the “Despatch Registry” for the Location that goods will be transferred From.

It will also create an open Transfer Order within the WMS “Receiving Registry” for the Location that goods will be transferred To.

Note: The receiving and shipping warehouse may need to complete the transfer within either the respective registries or within the Receive/Despatch Console Menus, this will be dependent on your workflows and preference settings.

STEPS TO PERFORMING A CONSOLE TRANSFER.

Step 1. Turn on the handheld and from the Console Menu Press Down Arrow then Select option 4. Transfer.

• Press 0 to return to Main Menu.

 
Step 5. Scan Barcode or Enter a Item Code.

• Press ENTER Key to Cancel and Return to Transfer Menu - Return to Step 2.
• Press 0 follow by Enter to complete a Transfer. Proceed to Step 14.
  Note: Can only complete a transfer if Steps 5 to 11 are at completed for at least 1 item)
  
  

Step 7. Edit the Quantity.

• Press ENTER to confirm new Quantity Return to Step 6.
  Note: If Scan Quantity setting is turned on then Quantity can only be altered by scanning each item being transferred. i.e. Can't enter in a new Quantity on the keypad.
• Press 0 to cancel editing the Quantity - Return to Step 6.
  
  

  

Step 8. Reconfirm the displayed item Quantity.

• Press Left Arrow to confirm Quantity - Proceed to Step 9.
• Press Right Arrow to reedit the Quantity - Return to Step 7.
  
  

  

Step 9. Type in Destination Bin Code or Scan Bin Barcode. Proceed to Step 10.

• Press 0 to Cancel Transfer Proceed to Step 13.
• Press ENTER to use * if no Destination Bin is required. Proceed to Step 10.
  Note: * is set as the default bin location. This Bin location is used to represent items without a Bin location.
  
  

  

Step 10. Confirm Destination Bin.

• Press Left Arrow to confirm Bin Location - Proceed to Step 11.
• Press Right Arrow to edit Destination Bin Location. Return to Step 9. 
  
  

  

Step 11. Continue the Transfer.....

• Press Left Arrow to continue adding items to Transfer Order. Proceed to Step 12.
• Press Right Arrow to complete/submit Transfer order. Return to Step 2.
  
  

  

Step 12. Enter Bin Code or Scan Bin Source Location to Transfer stock from. Return to Step 5.

• Press 0 to cancel transfer. Proceed to Step 13.
• Press ENTER to use * if no Destination Bin is Required. Return to Step 5.
  Note: * is set as the default bin location. This Bin location is used to represent items without a Bin location.
  
  

  

Step 13. Confirm Cancellation of Transfer.

• Press ESC to go back. Return to Step 9.
• Press ENTER to confirm Cancel. Return to Step 2. 
  
  

  

Step 14. Processing Order...

• Press ENTER to continue. Return to Step 2.
  
  

  

CONSOLE GLOSSARY

 
“BIN :” Bin Location. * is set as default bin. Used to represent items without a Bin location assigned.
“BRN#:” Refers to Batch/Serial Number. ~ is set as the batch/serial default. Used to represent items not batch/serial tracking.
“GTIN :” Barcode Number.
“SRC:” Source Location

Related articles

• Page:
  Import - Transfers
• Page:
  Console Workflows
• Page:
  Console - Transfer Stock
• Page:
  Console - Stock Lookup
• Page:
  Console - Receive Order(s)